Upvc Door Lock Replacement
The security of your home isn't a burden. With just a few tools and some know-how, you can complete the replacement of your door lock from upvc yourself.
The first step is to identify the type of lock mechanism that you have. This will enable you to find a replacement part that will fit perfectly.
How to go about it
The replacement of the door lock made of Upvc will help secure your home. This is particularly true for those who live in an area that is prone to break-ins. High-quality locks such as euro cylinder locks can in preventing burglaries as they provide an effective barrier that is difficult for intruders penetrate. However, enhancing your security doesn't stop at installing the right locks, but regular maintenance and monitoring of your doors may assist.
Change your uPVC lock isn't a difficult task however, it requires some skill. If you're unsure if you're able to do it yourself, it's best to hire an expert.
Before you start, you need to identify the type of uPVC lock that is installed on your door. This will allow you to locate a suitable replacement. Avocet is a common brand, as are Fulltex GU Ferco Mila Roto Yale and Fulltex GU Ferco.
You need to prepare the lock for installation after you have found it. This involves removing the long screw that is located on the bottom of the cylinder. You can use a screwdriver to do this, but using a power drill is more efficient.
Once the long screw has been removed, you are able to take the old cylinder off the door handle. This will reveal the cam of the lock. The new lock cylinder must be screwed into place. Once it's in position you can tighten the screw on the lock cylinder and screw the door handles back to their original positions.
patio door lock replacement is an easy task and should not take more than five minutes to complete. Test the lock after you've finished the steps to ensure that it operates correctly.
Tools
It's probably the time to replace your Upvc lock if it begins to behave like one of those unpredictable annoying friends who performs one day and then turns into an absolute pain the next. It's worth it in order to protect your home from burglars because a lock that isn't reliable can leave your property vulnerable to burglars.
It can be difficult to change a multipoint Upvc door lock, but it is possible to do it yourself and cost less than hiring a locksmith. You just need to be aware of signs that the lock needs to be replaced, and you should have some basic tools available.
For this job you'll need a screwdriver and a wrench. You may also require an ratchet, small spanner or a small spanner. You will also need to know the dimensions of your current cylinder lock. Make several measurements, including the backset. This is the distance from the centre of the cylinder to the door handle. Depending on the kind of upvc multipoint lock this could be between 45mm and 35mm.
If you have the proper tools, it's simply an issue of taking the old lock out, installing the new lock and screwing everything back into. After that, you can check the lock to make sure that it locks. You may want to test this in and out of the house with the key.
Regular cleaning of the mechanism and the lubrication process is a good idea too. Use a damp cloth to wipe the mechanism clean, and apply lubrication every six months using graphite powder or PTFE-based lubricant (do not apply oil, as it attracts dust). If your lock still doesn't function after you've tried these steps, it may be time to call an expert locksmith.

Measurements
A upvc door lock is an essential security feature to secure your home from unauthorised access. A defective lock can be identified by a difficulty in inserting the key, a squeezing in the handle, noticeable damage and an irregular latch function. The good news is that replacing a lock made of upvc is relatively easy and straightforward with the right tools and precise measurements. Regular maintenance, such as cleaning and lubrication can aid in prolonging the life of your upvc door lock.
It is important to measure accurately in millimetres to determine the kind of replacement lock that you need. Specifically, you will have to know the PZ dimension and backset dimensions. The PZ dimension is measured from the centre of the hole in the spindle to the top diameter hole in the lock barrel. The backset is measured from the front of the lock face plate to the center of spindle hole.
Whatever type of upvc lock that you have, it is important to ensure that it is a high-quality product to increase the security of your home. Anti-snap locks are a great option because they reduce the risk of snapping locks made from upvc and provide superior security to traditional lock.
Upgraded handles are another way to improve the security of your doors made of upvc. By investing in a Sold Secure SS301-approved set of security handles or a 2* Kitemark set will significantly increase the security of your door. Our online store has an entire selection of these products. You can also visit our showrooms to view the wide range of locks. Our experts are available to answer any questions regarding the security of your home. You can also browse our blog for tips on how to keep your home secure.
Replacement parts
If you are replacing the uPVC door lock because of mechanical failure, it's best to hire a locksmith rather than trying it yourself. This will ensure that the work is done correctly, and your home is safe from trespassers. Checkatrade can help you locate the nearest locksmith.
The first step to replacing the locks of a uPVC lock is to determine the dimensions of the new lock. It is done by measuring the distance between the edges of the keyhole. The measurement is usually in millimeters and is called the backset. It is also recommended to take two additional measurements namely the screw to spindle length and the front plate length.
Once you've determined the proper dimensions, you can place an order for the replacement parts. You'll also need to remove the screw that holds the faceplate on the lock cylinder. You can do this using either a screwdriver or wrench. After the screw is removed, the cylinder will come free by gently pulling.
Next, you will need to identify the type of centre case that you own. You'll need to know whether you have a latch and deadbolt centre case or a hook and latch centre case, or a deadbolt and lock centre case.
Once you've identified the kind of centre case you have, you will have to buy an additional lock barrel that is compatible with. You will have to insert the new barrel into the socket for handles after purchasing it. Then, you'll have to put the handles back in place and thread the spindle through the handle socket. Check the new cylinder after you're done to make sure it is working correctly.
Installation
A door lock made of upvc provides an additional layer of protection against break-ins. To ensure maximum security, the lock mechanism must be maintained regularly to ensure it functions properly. Regular cleaning with a damp cloth and lubrication of the mechanism every six months with a dust-resistant product such as graphite or PTFE oil can ensure your home is secure.
Changing the lock mechanism on your front door made of upvc may be a daunting task, but it's a job you can do yourself for less than the cost of hiring an expert locksmith. Understanding how the process works is key. Take your time and follow the steps with care.
Start by identifying the type of lock you have on your upvc door. If you are familiar with the manufacturer, you can find a like-for-like replacement at your local hardware store. Measure the main dimensions of the old lock mechanism to ensure you get the perfect fit (you can use this as a guide when you purchase your new lock).
Remove the handle to open the door. Use the screw that holds on the lock faceplate to take it off its mounting. Remove the lock mechanism from the door by gently wriggling it out. Unscrew the handle, and then disconnect the cable. Then, remove the cylinder and screw into the new one, being careful not to lose the pins.
Insert the new lock mechanism inside the door, screw it into place and tighten the handles. After everything is put back together and the door is tested, you can test it by inserting the key into the euro cylinder, and then ensuring that it moves effortlessly. You can also tighten the cable and re-screw barrel screws.